.
Page 84 15/09/2004 PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
CHARGE UNIT PRICE
Enter in this field the price per charge unit.
If the value 1/100 is selected in the field "Credit and charge unit (rounded)", enter 0.75 to
indicate a unit of 75 cents.
. EURO/NATIONAL CURRENCY CONVER.
The Euro value is given in 6 figures (7 characters with a decimal point).
CHARGE RECORDS
USE OF FORMAT 4500
NO YES
If you enter YES, the record format can either be printed or processed by SMDR.
STEP BY STEP DEFINITION
SMDR on a single line in “format 4500”.
PRINTER on several lines in “format 4500”.
The above parameters only appear if you have selected YES in the previous line.
OUTPUT CHANNEL
Billing data output is carried out on the CPU card serial port in
«format 6500 ».
PAD LINK
If you are using PAD link, records are processed by an
asynchronous link connected to the KITAXE or MUFACT server, in
"format 6500".
CAUTION: If the message "SMDR active" is displayed, set the parameters as follows:
------------------------------Call records-----------------------
Step by step output NO
------------------------------Data records--------------------------
Output packet data NO
Output circuit data NO
------------------------------Service record output---------------------
Agenda/alarm family Loggbook
Prepayment family Logbook
……..
Roaming family Logbook
------------------------------Monitoring records-------------------------
Step by step output NO
------------------------------Alarm management---------------------
Generation of a service record NO
----------------------------------------------------------------------------------
Step by step definition OUTPUT CHANNEL
To Next Page
Loading...