.
Page 90 15/09/2004 PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
MONITORING RECORDS
STEP BY STEP OUTPUT (IF SIMPLE OR EXTENDED FORMAT)
NO YES
Select YES to output monitoring records for subscribers and/or lines by means of the
Kitaxe or Mufact server with the sub-address 40. This selection depends on the selections
made in the following fields.
SUBSCRIBER MANAGEMENT
CALL TYPE
INCOM. AND OUTGO. INCOMING OUTGOING
Monitoring is possible according to the call type and for each subscriber.
To implement monitoring, validate the SUBSCRIBER MONITORING (RECORDS) line as
YES in the menu: Extension characteristics.
JUNCTOR MANAGEMENT
TRUNK IDENTIFIED BY
See explanation above.
A record can be printed for each transition: Selection, Ringing, Conversation, Release.
This field displays the transitions on a line or TS.
For each line or TS (menu 1-2-4), validate "Transitions monitoring" by entering YES.
To Next Page
Loading...