Contax TVS DIGITAL - Erasing Images

8. Erasing Images
<Erasing individual images>
I S et the mode dial to “FFI" and turn on the
camera.
2 P ress the '‘D MENU" button and use “•
on the button to select
(ERASE) and press the "dl" button.
[ERASE IMAGE?) appears on the LCD monitor.
or
3 U se or on the ‘S -n” button to
select the image that is to be erased.
4 U se “a" to select [EXECUTE] and press the
“d3” button.
• When the image has been erased, the next image on the card
wili be disDiayed automatically.
• When an Image with sound is erased, both the image and the
sound are erased.
• Protected images cannot be deleted. To delete protected
images, cancel the protection (P72) first.
<Erasing All lmages>
I S et the mode dial to “FFI” and turn on the
camera.
2 Press the "D MENU” button and use “•<" or
on the " " button to select
(ERASE ALL) and press the “di" button.
[ERASE ALL?) appears on the LCD monitor.
3 Use “a” to select [EXECUTE] and press the
"aJ” button.
• When an image with sound is erased, both the Image and the
sound are erased.
■ When all Images have been erased, the [NO IMAGE) message
Is displayed. If a protected image is present, that image is
displayed.
• Protected images cannot be deleted. To delete protected
images, cancel the protection (P72) first.
• It may not be possible to erase images recorded by other
cameras.
73