Figure 7.3-21 Overview Display of Setting Information Sub-functions
7.3.6.1 Set Group
This sub-section is divided into two further sub-section like Set Grp change and Grp Copy and in
this part user can change the group setting.
1- Set Grp change
This device has four setting groups and user can easily configure the group setting according to
operation demand. This setting is divided into four steps. User can access this function through
the following path: “Setting > Set group”. The procedure of group setting change is explaining in
below figure 7.3.22.
Firstly, enter the device login password. Secondly, select group setting. Thirdly, download new
configuring setting. Fourthly, cancel to return back or exit.
To Next Page
Loading...