Information.
Update 5.9 Event Records；
Update 8 Configurable Function: Add 8.3 Setting
Group Selection;
Update 5.10 Fault and Disturbance Recording;
Add 5.10.3 Waveform Recording Duration；
Update 5.10.1 Wave Recording File Format:
COMTRADE format standard to be IEC 60255-24;
Add 5.10.4 Fault Wave Recording;
Add Normal display structure of LCD in Normal
display structure of LCD. Update 7.1.4 Indication of
LED. Update Figure 7.3-7Overview Display.
Update IDMT curves for over quantity protection:
Curve parameters for ANSI and IEC IDMT curves;
Update 50BF Tolerance of time setting, Add Drop-off
time, Update the operation logic, add the CurDet BO
to be current detector relay to test the fast resetting
time.
Update the sampling rate from 48 to 20/24; Update
the maximum recording time is 5s.
Update IDMT curves for over quantity protection,
Add Curve_Type; Update 51P，67P，51G，67G，
46N，59，51NA，51NT Curve_Type in setting tables.
Add CB Position in General function block， add
Machine protection: Stabilized differential protection
for machines 87MPDIF, 87MF_DIF, MST, MQDS,
MDZS, 78O, 40O etc. Del 37C BIEna. Update
Configuration information, Update the voltage
Accuracy.
Update the sample points to be 40; Update the
maximum number of tagged records to be 36; Add
machine protection function list in chapter1.2.
Update Protection Function, add MDZS code.
Update Waveform Recording Duration description.
To Previous Page
Loading...