D-Link DWC-1000

Wireless Controller CLI Reference Guide
100
12.35 net Option pppoe configure
S.No
Command Name
Description
Type and Description
1
save
Save pppoe configuration changes.
2
cancel
Roll back pppoe configuration changes.
3
exit
Save pppoe configuration changes and current mode.
4
UserName
Set user name
String
5
Passw ord
Set Passw ord
String
6
AuthMode
Select Authentication Type
PPPOE Authentication Types.
7
Service
Set service name
String
8
CompressionEnable
Enable/Disable Compression Negotiation
Boolean choice
9
ConnectionMode
Set Connection Mode type
Boolean choice
10
IdleTimeOutValue
Set Idle TimeOut Value (in min)
PPPOE idle timeout Type.
11
GetIpFromIspEnable
Enable/Disable GetIpFromIsp
Boolean choice
12
StaticIp
Set static IP Address
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
13
NetMask
Set subnet mask
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
14
GetDnsFromIspEnable
Enable/Disable GetDnsFromIsp
Boolean choice
15
PrimaryDns
Set Primary DNS
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
16
SecondaryDns
Set Secondary DNS
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
12.36 net routing protocol_binding add
S.No
Command Name
Description
Type and Description
1
save
Save Protocol-Binding rules configuration changes.
2
exit
Save Protocol Binding rules configuration changes and exit
current mode.
3
cancel
Roll back configuration changes.
4
Service
Available Service
service type
5
Local_Gatew ay
local gateway type
OPTION interface type
6
Source_Netw ork
source netw ork type
firew all rule address type
7
Destination_Network
destination netw ork type
firew all rule address type
8
source_address_start
starting IP of the Source Netw ork
IP address
AAA.BBB.CCC.DDD w here