D-Link DWC-1000

Wireless Controller CLI Reference Guide
114
13.13 vpn sslvpn resource add
S.No
Command
Name
Description
Type and Description
1
save
Save sslvpn resource settings
2
exit
Save sslvpn resource settings and exit current
mode
3
cancel
Roll back sslvpn resource settings changes
4
resource_name
resource name
String, Max 128 characters and no ' or empty
space or "
5
service_type
service type
sslvpn resource
13.14 vpn sslvpn resource configure add
<ltresource_name>
S.No
Command Name
Description
Type and Description
1
<ltresource_name>
Add an sslvpn resource object
String, Max 128 characters and no ' or empty
space or "
2
save
Save sslvpn resource object settings
3
exit
Save sslvpn resource settings and exit
current mode
4
cancel
Roll back sslvpn resource settings changes
5
resource_name
resource name
String, Max 128 characters and no ' or empty
space or "
6
object_type
object type
sslvpn resource object type
7
object_address
object address
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
8
mask_length
mask length
number in range of 1 to 32
9
start_port
start port
Port number
10
end_port
end port
Port number
11
icmp_block
block icmp
source address type for users ip policy
13.15 vpn sslvpn resource configure delete
<ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Delete an sslvpn resource object
Unsigned integer
13.16 vpn sslvpn resource delete <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Delete an sslvpn resource
Unsigned integer