D-Link DWC-1000

Wireless Controller CLI Reference Guide
110
Chapter 13. Configuration commands
VPN
13.1 vpn l2tp server configure
S.No
Command Name
Description
Type and Description
1
save
Save l2tp server configuration changes.
2
cancel
Roll back l2tp server configuration changes.
3
exit
Save l2tp server configuration changes and
exit current mode.
4
enable
enable/disable L2TP server.
Boolean choice
5
start_address
L2TP server starting IP address.
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
6
end_address
L2TP server ending IP address.
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
7
EnablePap
enable pap authentication
Boolean choice
8
EnableChap
enable chap authentication
Boolean choice
9
EnableMSChapChap
enable MSchap authentication
Boolean choice
10
MSChapv2Enable
enable MSChapv2Enable authentication
Boolean choice
11
l2tpSecretKeyEnable
L2TP Enanle secret key
Boolean choice
12
secretKey
L2TP secret Key
String
13.2 vpn pptp client configure
S.No
Command
Name
Description
Type and Description
1
save
Save pptp client configuration changes.
2
cancel
Roll back pptp client configuration changes.
3
exit
Save pptp client configuration changes and
exit current mode.
4
enable
enable/disable PPTP client.
Boolean choice
5
server_address
PPTP server IP address.
IP address AAA.BBB.CCC.DDD w here each part is
in the range 0-255
6
remote_netw ork
Remote Netw ork Address
IP address AAA.BBB.CCC.DDD w here each part is
in the range 0-255
7
remote_subnet
Remote Netw ork Subnet Mask
Unsigned integer
8
username
Username allocated to client
String