Wireless Controller CLI Reference Guide
49
8.27 wlan peer_controller push_configuration
<ipaddr>
Start the configuration push for one peer sw itches.
IP address
AAA.BBB.CCC.DDD
w here each part is
in the range 0-255
8.28 wlan wids_security ap configure
Save Wids Security settings.
Save Configurable w ids security settings and exit current
mode.
Roll back Configurable w ids security settings changes.
Enable Rogue reporting for admin configured Rogue AP's.
Enable or disable Rogue reporting for AP's is operating on an
illegal channel.
Enable or disable the AP de-authentication attack.
Enable or disable Rogue reporting for fake managed AP's
detected w ith an invalid channel.
Enable or disable Rogue reporting for fake managed AP's
detected w ith a managed SSID.
Enable or disable Rogue reporting for APs detected w ith no
SSID.
Enable or disable Rogue reporting for managed AP's
detected w ith an invalid SSID.
Enable or disable Rogue reporting for AP's detected w ith
managed SSID's and an invalid security configuration.
Enable or disable Rogue reporting for standalone AP's
operating w ith unexpected configuration.
Enable or disable Rogue reporting for unknow n AP's
detected w ith a managed SSID.
Enable or disable Rogue reporting for unmanaged AP's on a
w ired network
Configure the Rogue detected trap interval.
w ired_detection_interval
Configure the wired network detection interval.
Enable or disable Rogue reporting for detection of
unexpected WDS devices.
8.29 wlan wids_security client configure
Save w ids client settings.
Save w ids client settings and exit current mode.
Roll back wids client settings changes.
Enable or Disable the Know n Client is authenticated w ith
unknow n AP test
To Next Page
Loading...
