D-Link DWC-1000

Wireless Controller CLI Reference Guide
17
Chapter 6. Show commands used in
CLI
The s how commands for all the above mentioned branches are outlined in this section.
6.1 WLAN Management
The command show wlan at the CLI prompt would give the description of all the show commands in the
branch wlan , which is as follows:
Sl No
Command Name
Purpose
1
show wlan ap_management
Display the parameters related to ap
management
2
show wlan ap_management channel_plan
Display the configured channel plan
parameters.
3
show wlan ap_management pow er_plan
Display the configured power plan
parameters.
4
show wlan ap_management oui
Local OUI Database Entries
5
show wlan ap_management discovery
Display AP and peer sw itch discovery
parameters.
6
show wlan ap_management channel_plan status <ltradio>
Display the configured channel plan
parameters.
7
show wlan ap_management channel_plan history <ltradi o>
Display the channel plan history.
8
show wlan ap_management channel_plan proposed <ltradio>
Display the proposed channel
adjustments.
9
show wlan ap_management pow er_plan status
Display the configured power plan
parameters.
10
show wlan ap_management pow er_plan proposed
Display the proposed power adjustments.
11
show wlan ap_management oui database
Display Local OUI Database
12
show wlan ap_management discovery status
Display Discovery parameters
13
show wlan ap_management discovery ip_list
Display IP Poll discovery list.
14
show wlan ap_management discovery vlan_list
Display VLAN ID discovery list.
15
show wlan ap_management oui status <l touival>
Display Local OUI Database for a ouival
16
show wlan ap_conf
Display AP configuration and status
17
show wlan ap_conf capability
Display AP hardw are capability.
18
show wlan ap_conf macaddr
Display AP configuration and status for
specific AP
19
show wlan ap_conf database
Display AP configuration and status.
20
show wlan network
Display netw ork configuration parameters.
21
show wlan ap_conf download
Display AP code dow nload configuration
and status.
22
show wlan network status
Display netw ork configuration parameters
23
show wlan network networkid <ltid>
Display netw ork configuration parameters
for specific network
24
show wlan ap_conf failure_status
Display AP association and authentication
failure status.
25
show wlan ap_conf image_availability
Display WS stored AP image information.
26
show wlan ap_conf profile
Display AP profile parameters.
27
show wlan ap_conf provisioning_status
Display AP Provisioning parameteres.
28
show wlan ap_conf radio_status
Display Radio configuration.
29
show wlan ap_conf rf-scan_status
Display WS managed APs RF Scan data.
30
show wlan ap_conf status
Display WS managed AP status