D-Link DWC-1000

Wireless Controller CLI Reference Guide
18
parameters.
31
show wlan ap_conf capability status
Display AP hardw are capability.
32
show wlan ap_conf capability image_table
Display AP image capability table
33
show wlan ap_conf capability hardware
<lthw_dwl8600|hw_dwl3600|hw_dwl6600> <ltradio>
Display AP hardw are capability for
specific hardware
34
show wlan ap_conf database status
Display AP configuration and status.
35
show wlan ap_conf database macaddr <ltmacaddr>
Display AP configuration and status for
specific AP
36
show wlan ap_conf profile status
Display AP profile parameters.
37
show wlan ap_conf profile radio
Display AP profile radio parameters.
38
show wlan ap_conf profile radio status <ltid> <ltradio>
Display AP profile radio parameters.
39
show wlan ap_conf profile radio auto_eligible <ltid> <ltradio>
Display supported and enabled channels
for AP profile radio parameters.
40
show wlan ap_conf profile radio mcs_indices <ltid> <ltradio>
Display supported MCS indices for the AP
profile radio
41
show wlan ap_conf profile radio qos <ltid> <l tradio>
Display QoS parameters for the AP profile
radio.
42
show wlan ap_conf profile radio rates <ltid> <ltradio>
Display advertised and supported rates for
AP profile
43
show wlan ap_conf profile radio tspec <ltid> <ltradio>
Display TSPEC parameters for the AP
profile radio
44
show wlan ap_conf profile radio vap <ltid> <ltradio>
Display AP profile VAP parameters.
45
show wlan ap_conf profile profileid <ltprofileid>
Display AP profile parameters for specific
profile
46
show wlan ap_conf macaddr dist_tunnel_statistics
<ltmacaddr>
Display L2 Distributed Tunnel statistics for
AP.
47
show wlan ap_conf macaddr dist_tunnel_status <ltmacaddr>
Display L2 Distributed Tunnel status for
AP.
48
show wlan ap_conf macaddr failure_status <ltmacaddr>
Display WS managed AP failure status
parameters.
49
show wlan ap_conf macaddr provisioning_status <ltmacaddr>
Display AP Provisioning status
parameters.
50
show wlan ap_conf macaddr radio_status <ltmacaddr>
Display WS managed AP radio status
parameters.
51
show wlan ap_conf macaddr rf_scan_rogue_classification
<ltmacaddr>
Display the WIDS AP rogue classification
test results.
52
show wlan ap_conf macaddr rf_scan_status <ltmacaddr>
Display RF Scan AP status parameters.
53
show wlan ap_conf macaddr rf_scan_triangulation
<ltmacaddr>
Display signal triangulation status.
54
show wlan ap_conf macaddr statistics <ltmacaddr>
Display WS managed AP statistics.
55
show wlan ap_conf macaddr status <ltmacaddr>
Display WS managed AP status
parameters.
56
show wlan ap_conf macaddr tspec_statistics <ltmacaddr>
Display WS managed AP TSPEC
statistics.
57
show wlan ap_conf macaddr tspec_status <ltmacaddr>
Display WS managed AP TSPEC status.
58
show wlan client
Display AP associated client configuration
and status.
59
show wlan known_client
Display the w ireless Known Client(s)
60
show wlan client adhoc
Display Ad Hoc network information.
61
show wlan client detected-client
Display detected clients information
62
show wlan client rrm
Display Radio Resource Measurement
(RRM) information.
63
show wlan client summary
Display associated client summary
parameters.
64
show wlan client adhoc status
Display WS detected clients on an ad-hoc
network
65
show wlan client rrm status
Show associated client Radio Resource
Measurement status parameters.
66
show wlan client status
Display associated client status