Wireless Controller CLI Reference Guide
42
and apply pow er adjustments.
Set the mode of pow er plan assignment
8.6 wlan ap_management poll_list configure
Save poll list configuration changes
Roll back poll list configuration changes.
Save poll list configuration changes and
current mode.
Configure a VLAN ID for L2 discovery.
Configure IP address to poll.
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
8.7 wlan ap_management poll_list
delete_ip_address <ipaddr>
w lan ap-management ap-database
configuration mode
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
8.8 wlan ap_management poll_list
delete_vlan_list <id>
w lan ap-management poll-list delete an
vlanid
8.9 wlan ap_management poll_list discovery
configure
Save poll-list discovery configuration changes
Roll back poll-list discovery configuration
changes.
Save poll-list discovery configuration changes
and current mode.
Enable/Disable specific discovery method.
Enable/Disable the discovery of APs and
peer sw itches using L2 multicast frames.
Enable/Disable the discovery of APs and
peer sw itches using IP polling method
8.10 wlan ap_management oui_database add
Save oui database configuration changes
Roll back oui database configuration
changes.