D-Link DWC-1000

Wireless Controller CLI Reference Guide
72
Chapter 12. Configuration commands
NET
12.1 net ipv6_tunnel six_to_four configure
S.No
Command Name
Description
Type and Description
1
save
Save sixToFour Tunnel configuration changes.
2
exit
Save sixToFour Tunnel configuration changes and exit
current mode.
3
cancel
Roll back sixToFourTunnel configuration changes.
4
automatic_tunneling_enable
enable/disable automatic tunneling w hich will allow traffic
from a LAN IPv6 netw ork to be tunneled through a Option
IPv4 netw ork to reach an IPV6 netw ork.
Boolean choice
12.2 net ddns Option1 configure
S.No
Command Name
Description
Type and Description
1
save
Save DDNS configuration changes.
2
exit
Save DDNS configuration changes and exit current mode.
3
cancel
Roll back DDNS configuration changes.
4
enable
Enable or disable Dyndns to provide Dynamic DNS service
Boolean choice
5
hostname
Set Hostname.
String
6
username
Set username.
String
7
password
Set Passw ord.
String
8
time_update_enable
Set Timeperiod as 30 days.
Boolean choice
9
w ild_flag_enable
Enable / Disable using w ild cards.
Boolean choice
12.3 net ddns Option2 configure
S.No
Command Name
Description
Type and Description
1
save
Save DDNS configuration changes.
2
exit
Save DDNS configuration changes and exit current mode.
3
cancel
Roll back DDNS configuration changes.
4
enable
Enable or disable Dyndns to provide Dynamic DNS service
Boolean choice
5
hostname
Set Hostname.
String
6
username
Set username.
String
7
password
Set Passw ord.
String
8
time_update_enable
Set Timeperiod as 30 days.
Boolean choice
9
w ild_flag_enable
Enable / Disable using w ild cards.