D-Link DWC-1000

Wireless Controller CLI Reference Guide
53
9.2 system logging ipv4 configure
S.No
Command Name
Description
Type and Description
1
<ltfacility>
System logging facility configuration mode.
Logging Facility Type.
2
save
Save log Facility configuration changes.
3
exit
Save log facility configuration changes and exit current
mode.
4
cancel
Roll back log Facility configuration changes.
5
level_options_set
Set level options. This command can be run multiple
times in this view to set different level options.
Logging Facility Type.
Logging Level Options Type.
Boolean choice
9.3 system logging remote configure
S.No
Command Name
Description
Type and Description
1
save
Save remoteLogging configuration changes.
2
exit
Save remote logging configuration changes and exit
current mode.
3
cancel
Roll back remote logging configuration changes.
4
log_identifier
Set the log identifier prefixed to both, e-mail and Syslog
messages.
String
5
email_logs_enable
Set w hether or not system emails scheduled logs.
Boolean choice
6
email_server
Set options for emailing of logs.
String
7
return_email
Set email address SMTP server replies are sent.
String
8
send_to_email
Set email address w here logs and alerts w ill be sent.
String
9
smtp_auth
Set SMTP authentication details.
10
smtp_auth type
Set SMTP authentication types.
SMTP Authentication Types.
11
smtp_auth username
Set SMTP authentication username (for plain and CRAM-
MD5 auth).
String
12
smtp_auth password
Set SMTP authentication password (for plain and CRAM-
MD5 auth).
String
13
identd_from_smtp_ser
ver_enable
Enable/Diable to identd from smtp server.
Boolean choice
14
schedule
Set schedule for sending log by email.
15
schedule unit
Set schedule unit.
Schedule Unit Types.
16
schedule day
Set schedule day.
Schedule Day Types.
17
schedule time
Set schedule time.
Schedule Time Units Types.
18
schedule meridiem
Set schedule meridiem.
Schedule Meridiem Types.
19
syslog_server
syslog
20
syslog_server
server_name1
server1
21
syslog_server
server_name2
server2