D-Link DWC-1000

Wireless Controller CLI Reference Guide
26
6.6 RADIUS
The command radius at the CLI prompt would give the description of all the
configuration commands in the branch radius , which is as follows:
Sl No
Command Name
Purpose
1
radius configure <ltr adius_server >
RADIUS configuration mode.
2
radius delete <ltradius_server>
Delete a RADIUS configuration mode.
6.7 Help
The command help at the CLI prompt would give the description of all the configuration
commands in the branch help , which is as follows:
Sl No
Command Name
Purpose
1
.help
Display an overview of the CLI syntax