Wireless Controller CLI Reference Guide
58
SNMP managers. To allow any IP on the netw ork to
manager the device enter 255.255.255.0. For a specific
host, enter 255.255.255.255. To allow global access,
enter 0.0.0.0.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
SNMP trap port the trap messages w ill be sent to.
The community string to w hich the agent belongs. Most
agents are configured to listen for traps in the Public
community
9.12 system snmp access edit <ltrowid>
Save SNMP access control configuration changes.
Save SNMP access configuration changes and exit
current mode.
Roll back snmp configuration changes.
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
The network mask used to determine the list of allow ed
SNMP managers. To allow any IP on the netw ork to
manager the device enter 255.255.255.0. For a specific
host, enter 255.255.255.255. To allow global access,
enter 0.0.0.0.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
SNMP trap port the trap messages w ill be sent to.
The community string to w hich the agent belongs. Most
agents are configured to listen for traps in the Public
community
9.13 system snmp access delete <ltrowid>
snmp access configuration mode
9.14 system switch_settings power_saving
configure
Save pow erMode configuration changes.
Save pow er mode configuration changes and exit current
mode.
Roll back content Filtering ow er mode configuration
changes.
Enable/Disable Link status
enable/disable Cable Length