D-Link DWC-1000

Wireless Controller CLI Reference Guide
80
Unsigned integer
2
save
Save Ip Alias server configuration changes.
3
cancel
Roll back Ip Alias server configuration
changes.
4
exit
Save Ip Aias server configuration changes
and exit current mode.
5
Interface
Select the Interface for the Ip Aliasing
OPTION interface type
6
Ip_Address
Ip Address for ip Aliasing.
IP address AAA.BBB.CCC.DDD w here each part is
in the range 0-255
7
Subnet_Mask
Subnet mask for ip Aliasing
IP address AAA.BBB.CCC.DDD w here each part is
in the range 0-255
12.20 net mode configure
S.No
Command Name
Description
Type and Description
1
save
Save IP Mode configuration changes.
2
exit
Save IP Mode configuration changes and
exit current mode.
3
cancel
Roll back IP Mode configuration changes.
4
ip_type
Select IPv4 only or IPv4/IPv6 mode.
select the ip address type
12.21 net ipv6_tunnel isatap add
S.No
Command
Name
Description
Type and Description
1
save
Save isatap tunnel configuration changes.
2
exit
Save isaptap tunnel configuration changes and exit current
mode.
3
cancel
Roll back isatap tunnel configuration changes.
4
subnet_prefix
This is the 64-bit subnet prefix that is assigned to the logical
ISATAP subnet for this intranet.
String
5
end_point_type
This is the endpoint address for the tunnel that starts w ith this
router. The endpoint can be the LAN interface (assuming the
LAN is an IPv4 netw ork), or a specific LAN IPv4 address
select the local end point address
type
6
ipv4_address
The local end point address if not the LAN IPv4 address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
12.22 net ipv6_tunnel isatap edit <ltrow_id>
S.No
Command
Name
Description
Type and Description
1
<ltrow_id>
isatap Tunnel configuration mode.
Unsigned integer
2
save
Save isatap tunnel configuration changes.
3
exit
Save isaptap tunnel configuration changes and exit current
mode.
4
cancel
Roll back isatap tunnel configuration changes.
5
subnet_prefix
This is the 64-bit subnet prefix that is assigned to the logical
ISATAP subnet for this intranet.
String
6
end_point_type
This is the endpoint address for the tunnel that starts w ith this
router. The endpoint can be the LAN interface (assuming the
LAN is an IPv4 netw ork), or a specific LAN IPv4 address
select the local end point address
type