D-Link DWC-1000

Wireless Controller CLI Reference Guide
57
9.8 system snmp trap delete <ltagent_ip>
S.No
Command Name
Description
Type and Description
1
<ltagent_ip>
Delete a SNMP trap configuration.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
9.9 system snmp users configure <ltuser>
S.No
Command Name
Description
Type and Description
1
<ltuser>
SNMP v3 User list configuration changes
snmpv3uers list user type
2
save
Save SNMP trap configuration changes.
3
exit
save SNMP v3 Users configuration changes and exit
current mode.
4
cancel
Roll back SNMP v3 Users configuration changes.
5
security_level
authentication and privacy settings .
snmp security level type for
snmpv3users list
6
authentication_algo
choose betw een MD5 or SHA authentication
snmpv3uers list authentication
algorithm type
7
privacy_algorithm
DES-56 privacy is available for the authentication
negotiation
snmpv3uers list privacy
algorithm type
8
authentication_passwo
rd
shared authentication password with the SNMPv3 user.
String
9
privacy_password
shared privacy password with the SNMPv3 user
String
9.10 system snmp sys configure
S.No
Command Name
Description
Type and Description
1
save
Save SNMP system configuration changes.
2
cancel
Roll back snmp configuration changes.
3
exit
Save SNMP system configuration changes and exit
current mode.
4
sys-contact
Set system contact information.
String
5
sys-location
Set system location information.
String
6
sys-name
Set system name information.
String
9.11 system snmp access add
S.No
Command Name
Description
Type and Description
1
save
Save SNMP access control configuration changes.
2
exit
Save SNMP access configuration changes and exit
current mode.
3
cancel
Roll back snmp configuration changes.
4
agent
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
5
subnet_mask
The network mask used to determine the list of allow ed