D-Link DWC-1000

Wireless Controller CLI Reference Guide
109
1
<lttime>
set the reachable time of neighbour
cache entries
number in range of 30 to 150
12.58 net tahi ping6 <ltip> <ltsize>
S.No
Command Name
Description
Type and Description
1
<ltip> <ltsize>
ping6 on LAN interface with count one
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
w here each part is in the range [0-9A-Fa-f:]
number in range of 1 to 1500
12.59 net tahi pmtu-route-add <ltipAdd>
S.No
Command Name
Description
Type and Description
1
<ltipAdd>
add ipv6 route on lan interface.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
w here each part is in the range [0-9A-Fa-f:]
12.60 net upnp configure
S.No
Command Name
Description
Type and Description
1
save
Save upnp configuration changes.
2
cancel
Roll back upnp configuration changes.
3
exit
Save upnp configuration changes and current
mode.
4
enable
Enable/Disable UPNP
Boolean choice
5
Interface
Select the interface from LAN/VLAN
String
6
advertisement
Set upnp advertisement parameters
7
advertisement period
Set Advertisement Period (in seconds)
UPnP Advertisement Period Type.
8
advertisement
time_to_live
Set Advertisement Time To Live (in seconds)
UPnP Advertisement Time To Live Type.