Wireless Controller CLI Reference Guide
24
show OSPFv3 Configuration
show net routing ospfv2 setup
Display OSPFv2 Configuration
show net routing ospfv3 setup
Display OSPFv3 Configuration
show net port management setup
Display port management configuration
Display pppoe client Configuration.
show net routing protocol_binding
show protocol_binding rules
show net routing protocol_binding setup
Display protocol Binding Rules
Display RADVD configuration
Show dynamic routing setup
show net routing dynamic setup
Show dynamic routing Setup.
show net routing static ipv4
show net routing static ipv4 setup
Show all the configured IPV4 routes.
show net routing static ipv6
show net routing static ipv6 setup
Show all the configured IPV6 routes.
Display UPnP portmap Information.
Display UPnP portmap Information.
6.4 VPN
The command show vpn at the CLI prompt would give the description of all the show
commands in the branch vpn , which is as follows:
show vpn l2tp server setup
Display l2tp server setup.
show vpn l2tp server connections
Display l2tp server stats.
show vpn pptp client setup
Display pptp client setup.
show vpn pptp client_status
show pptp client status details
show vpn pptp client_status setup
Display pptp client status setup.
show vpn pptp server setup
Display pptp server setup.
show vpn pptp server connections
Display pptp server stats.
show sslvpn client settings
show sslvpn policy settings
show vpn sslvpn portal-layouts
show sslvpn portal-layouts settings
show vpn sslvpn portforwarding
show sslvpn portforwarding settings
show vpn sslvpn portforwarding appconfig
show sslvpn portforwarding appconfig
settings
show vpn sslvpn portforwarding hostconfig
show sslvpn portforwarding hostconfig
settings
show sslvpn resource settings
show vpn sslvpn resource-object <ltresource_name>
show sslvpn resource object settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
