D-Link DWC-1000

Wireless Controller CLI Reference Guide
111
9
password
Passw ord allocated to client
String
10
mppe_enable
Enable mppe encryption
Boolean choice
11
time_out
Time Out
Unsigned integer
13.3 vpn pptp client_action <ltaction>
S.No
Command Name
Description
Type and Description
1
<ltaction>
vpn pptp client action set.
Boolean choice
13.4 vpn pptp server configure
S.No
Command Name
Description
Type and Description
1
save
Save pptp server configuration changes.
2
cancel
Roll back pptp server configuration
changes.
3
exit
Save pptp server configuration changes
and exit current mode.
4
enable
enable/disable PPTP server.
Boolean choice
5
Natenable
enable/disable PPTP NAT routing mode
Boolean choice
6
start_address
PPTP server starting IP address.
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
7
end_address
PPTP server ending IP address.
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
8
pap_enable
PPTP server PAP authentication
Boolean choice
9
chap_enable
PPTP server CHAP authentication
Boolean choice
10
ms chap_enable
PPTP server MSCHAP authentication
Boolean choice
11
mschapv2_enable
PPTP server MSCHAPV2 authentication
Boolean choice
12
Mppe40Enable
PPTP server Mppe40
Boolean choice
13
Mppe128Enable
PPTP server Mppe128
Boolean choice
14
MppeStatefullEnable
PPTP server MppeStatefull
Boolean choice
15
UserTimeOut
PPTP server User TimeOut
Boolean choice
13.5 vpn sslvpn portal-layouts add
S.No
Command Name
Description
Type and Description
1
save
Save portal settings
2
exit
Save portal settings and exit current mode
3
cancel
Roll back portal settings changes
4
portal_name
Specify the portal name
String, Max 128 characters and no ' or empty
space or "