D-Link DWC-1000

Wireless Controller CLI Reference Guide
44
4
cancel
Roll back AP Profile settings changes.
5
profile_name
Configure a name for the AP Profile.
String
6
hardw are_type
Configure hardw are type
AP Hardw are Types
7
vlanid
Configure the wired network detection vlan id
vlan id possible values
8.15 wlan ap_profile delete <profileid>
S.No
Command Name
Description
Type and Description
1
<profileid>
Delete a AP Profile
AP Profile ID
8.16 wlan ap_profile copy <sourceprofileid>
<destprofileid>
S.No
Command Name
Description
Type and Description
1
<sourceprofileid>
<destprofileid>
Copy an existing AP profile to a new AP
profile
AP Profile ID
AP Profile ID
8.17 wlan ap_profile radio configure <profileid>
<radio>
S.No
Command Name
Description
Type and Description
1
<profileid> <radio>
w lan ap_profile radio configuration mode
AP Profile ID
w ireless radio interface
2
save
Save AP profile radio settings.
3
exit
Save AP profile radio settings and exit
current mode.
4
cancel
Roll back AP profile radio settings changes.
5
mode
Configure the physical mode for the radio
interface
6
state_on
Enable/Disable Station Isolation.
Boolean choice
7
rts_threshold
Configure the RTS threshold
Unsigned integer
8
enable_load_balancing
Enable load balancing parameters for the
radio.
Boolean choice
9
load_utilization
Configure the percentage utilization.
range of power perventage
10
maximum_clients
Configure the maximum number of
simultaneous client associations allowed.
Unsigned integer
11
rf_scan_otherchannels
Enable/Disable scan of other channels.
Boolean choice
12
rf_scan_sentry
Set the scan mode to sentry.
Boolean choice
13
dtm_period
Configure the DTIM period.
Unsigned integer
14
beacon_interval
Configure the beacon interval
Unsigned integer
15
automatic_channel
Enable/Disable the Automatic Pow er Save
Delivery mode for the radio.
Boolean choice