Danfoss iC2 User Manual

Selection number Selection name Selection description
22 Comparator 0 Use result of comparator 0 in logic rule.
23 Comparator 1 Use result of comparator 1 in logic rule.
24 Comparator 2 Use result of comparator 2 in logic rule.
25 Comparator 3 Use result of comparator 3 in logic rule.
26 Logic rule 0 Use result of logic rule 0 in logic rule.
27 Logic rule 1 Use result of logic rule 1 in logic rule.
28 Logic rule 2 Use result of logic rule 2 in logic rule.
29 Logic rule 3 Use result of logic rule 3 in logic rule.
30 SL Time-out 0 Use result of timer 0 in logic rule.
31 SL Time-out 1 Use result of timer 1 in logic rule.
32 SL Time-out 2 Use result of timer 2 in logic rule.
33 Digital input T13 Use value of DI1 in logic rule.
34 Digital input T14 Use value of DI2 in logic rule.
35 Digital input T15 Use value of DIO in logic rule.
36 Digital input T17 Use value of DI3 in logic rule.
39 Start command This event is True, if frequency converter is started by any means
(digital input or other).
40 Drive stopped This event is True, if frequency converter is stopped or coasted by
any means (digital input or other).
42 Auto Reset Trip An auto reset is performed.
50 Comparator 4 Use result of comparator 4 in logic rule.
51 Comparator 5 Use result of comparator 5 in logic rule.
60 Logic rule 4 Use result of logic rule 4 in logic rule.
61 Logic rule 5 Use result of logic rule 5 in logic rule.
70 SL Time-out 3 Use result of timer 3 in logic rule.
71 SL Time-out 4 Use result of timer 4 in logic rule.
72 SL Time-out 5 Use result of timer 5 in logic rule.
73 SL Time-out 6 Use result of timer 6 in logic rule.
74 SL Time-out 7 Use result of timer 7 in logic rule.
83 Lost Load Lost load is performed.
P 8.4.2.4 Reset Controller
Select to reset parameters to default settings.
204 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters

Danfoss iC2 Specifications

General

Brand	Danfoss
Model	iC2
Category	Media Converter
Language	English