Danfoss iC2 - Page 284

Group index Group name Parameter
index
Parameter name Parameter
number
Type
6 Maintenance & Service
6.1 Status
6.1.1 Latest Fault Number 1530 uint8
6.1.2 Operating Hours 1500 uint32
6.1.3 Running Hours 1501 uint32
6.1.4 kWh Counter 1502 uint32
6.1.5 Power Up's 1503 uint32
6.1.6 Over Temp's 1504 uint16
6.1.7 Overvolt's 1505 uint16
6.1.8 Reset kWh Counter 1506 enum
6.1.9 Reset Running Hours Counter 1507 enum
6.1.10 Internal Fault Reason 1531 int16
6.1.11 Fault Log: Time 1532 uint32
6.2 Software Information
6.2.1 Application Version 1543 Visible
String
6.2.2 SW ID Control Card 1549 Visible
String
6.2.3 SW ID Power Card 1550 Visible
String
6.2.7 ECP SW Version 1548 Visible
String
6.5 Cooling Fan
6.5.1 Fan Control Mode 1452 enum
6.6 Parameter Handling
6.6.1 Active Set-up 10 enum
6.6.2 Programming Set-up 11 enum
6.6.3 Link Setups 12 enum
6.6.4 Set-up Copy 51 enum
6.6.6 Reset Mode 1420 enum
6.6.7 Automatic Restart Time 1421 uint16
6.6.8 Operation Mode 1422 enum
6.6.9 Service Code 1429 uint32
6.6.12 ECP Copy 50 enum
284 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters