Danfoss iC2 - Page 283

Application Guide | iC2-Micro Frequency Converters
Group index Group name Parameter
index
Parameter name Parameter
number
Type
5.12.4 Feedback
5.12.4.1 Feedback 1 Resource 720 enum
5.12.4.2 Feedback 2 Resource 722 enum
5.12.4.3 Feedback 1 Conversion 760 enum
5.12.4.4 Feedback 2 Conversion 762 enum
5.12.5 PID Controller
5.12.5.1 PID Proportional Gain 733 uint16
5.12.5.2 PID Integral Time 734 uint32
5.12.5.4 Antiwindup Enabled 731 enum
5.12.5.5 PID Differentiation Time 735 uint16
5.12.5.6 PID Diff. Gain Limit 736 uint16
5.12.5.7 PID Normal/ Inverse Control 730 enum
5.12.5.8 PID Start Speed 732 uint16
5.12.5.9 On Reference Bandwidth 739 uint8
5.12.6 Feed Forward
5.12.6.1 PID Feed Forward Factor 738 uint16
5.12.7 SleepMode
5.12.7.1 Sleep Mode in Process Closed-loop
Mode
2202 enum
5.12.7.2 Minimum Run Time 2240 uint16
5.12.7.3 Minimum Sleep Time 2241 uint16
5.12.7.4 Wake-Up Speed [Hz] 2243 uint16
5.12.7.5 Wake-Up Reference/Feedback Dif-
ference
2244 uint8
5.12.7.6 Setpoint Boost 2245 int8
5.12.7.7 Maximum Boost Time 2246 uint16
5.12.7.8 Sleep Speed [Hz] 2247 uint16
5.12.7.9 Sleep Delay Time 2248 uint16
5.12.7.10 Wake-Up Delay Time 2249 uint16
5.27 Fieldbus Process Data
5.27.1 PCD Write Selection 842 enum
5.27.2 PCD Read Selection 843 enum
5.27.3 PCD User Define 843 uint16
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 283