Danfoss iC2 - Page 285

Application Guide | iC2-Micro Frequency Converters
Group index Group name Parameter
index
Parameter name Parameter
number
Type
6.6.20 Password 60 uint16
6.6.21 Production Settings 1428 enum
6.6.22 Defined Parameters 1592 uint16
6.6.23 Drive Identification 1598 Visible
String
6.6.26 Language 1 enum
6.7 Drive Identification
6.7.1 Drive Type 1540 Visible
String
6.7.2 Power Section 1541 Visible
String
6.7.3 Voltage 1542 Visible
String
6.7.4 Ordered Model Code 1544 Visible
String
6.7.6 Drive Ordering No 1546 Visible
String
6.7.7 Drive Serial Number 1551 Visible
String
6.7.9 Power Card Serial Number 1553 Visible
String
8 Customization
8.1 Custom Readout
8.1.1 Custom Readout 1609 int32
8.1.2 Custom Readout Unit 30 enum
8.1.3 Custom Readout Min Value 31 int32
8.1.4 Custom Readout Max Value 32 int32
8.4 Smart Logic Controller
8.4.1 Status
8.4.1.1 Controller State 1638 uint8
8.4.1.2 Counter A 1672 int16
8.4.1.3 Counter B 1673 int16
8.4.2 SLC Settings
8.4.2.1 Enable Controller 1300 enum
8.4.2.2 Start Controller 1301 enum
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 285