Danfoss iC2 - Page 286

Group index Group name Parameter
index
Parameter name Parameter
number
Type
8.4.2.3 Stop Controller 1302 enum
8.4.2.4 Reset Controller 1303 enum
8.4.3 Comparators
8.4.3.1 Comparator Operand 1310 enum
8.4.3.2 Comparator Operator 1311 enum
8.4.3.3 Comparator Value 1312 int32
8.4.4 Timers
8.4.4.1 Timer 1320 uint32
8.4.5 Logic Rules
8.4.5.1 Logic Rule Boolean 1 1340 enum
8.4.5.2 Logic Rule Operator 1 1341 enum
8.4.5.3 Logic Rule Boolean 2 1342 enum
8.4.5.4 Logic Rule Operator 2 1343 enum
8.4.5.5 Logic Rule Boolean 3 1344 enum
8.4.6 States
8.4.6.1 Event 1351 enum
8.4.6.2 Action 1352 enum
9 I/O
9.3 I/O Status
9.3.1 Digital Input Status 1660 uint16
9.3.2 Digital Output Status 1666 uint16
9.3.3 T31 Analog Output [mA] 1665 uint16
9.3.4 T33 Setting 1661 enum
9.3.5 T33 Analog Input 1662 uint16
9.3.6 T34 Setting 1663 enum
9.3.7 T34 Analog Input 1664 uint16
9.3.8 T18 Pulse Input [Hz] 1668 int32
9.3.9 T15 Pulse Output [Hz] 1669 int32
9.3.10 Relay Output 1671 uint16
9.4 Digital Inputs/Outputs
9.4.1 Digital Input Setting
9.4.1.1 Digital I/O mode 500 enum
9.4.1.2 T13 Digital Input 510 enum
286 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters