Danfoss iC2 - Page 287

Application Guide | iC2-Micro Frequency Converters
Group index Group name Parameter
index
Parameter name Parameter
number
Type
9.4.1.3 T14 Digital Input 511 enum
9.4.1.4 T15 Digital Input 512 enum
9.4.1.5 T17 Digital Input 513 enum
9.4.1.6 T18 Digital Input 515 enum
9.4.2 T15 as Digital Output
9.4.2.1 T15 Mode 501 enum
9.4.2.2 T15 Digital Output 530 enum
9.4.2.3 T15 DO ON-Delay 534 uint16
9.4.2.4 T15 DO OFF-Delay 535 uint16
9.4.3 Relay
9.4.3.1 Function Relay 540 enum
9.4.3.2 Relay ON-Delay 541 uint16
9.4.3.3 Relay OFF-Delay 542 uint16
9.4.4 T18 as Pulse Input
9.4.4.1 T18 High Frequency 556 uint32
9.4.4.2 T18 Low Frequency 555 uint32
9.4.4.3 T18 High Ref./Feedb. Value 558 int32
9.4.4.4 T18 Low Ref./Feedb. Value 557 int32
9.4.4.5 T18 Pulse Filter Time Constant 559 uint16
9.4.4.6 T18 PWM Polarity 505 enum
9.4.4.7 T18 High Duty 507 uint16
9.4.4.8 T18 Low Duty 506 uint16
9.4.5 T15 as Pulse Output
9.4.5.1 T15 Pulse Output Variable 560 enum
9.4.5.2 T15 Pulse Output Max Freq 562 uint32
9.4.6 Bus Control
9.4.6.1 Digital & Relay Bus Control 590 uint32
9.4.6.2 T15 Pulse Out Bus Control 593 uint16
9.4.6.3 T15 Pulse Out Timeout Preset 594 uint16
9.5 Analog Inputs/Outputs
9.5.1 Output Terminal 31
9.5.1.1 T31 Mode 690 enum
9.5.1.2 T31 Analog Output 691 enum
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 287