Danfoss iC2 - Page 288

Group index Group name Parameter
index
Parameter name Parameter
number
Type
9.5.1.3 T31 Output Max Scale 694 uint16
9.5.1.4 T31 Output Min Scale 693 uint16
9.5.1.5 T31 Output Bus Control 696 uint16
9.5.2 Input Terminal 33
9.5.2.1 T33 Mode 619 enum
9.5.2.2 T33 High Voltage 611 uint16
9.5.2.3 T33 Low Voltage 610 uint16
9.5.2.4 T33 High Current 613 uint16
9.5.2.5 T33 Low Current 612 uint16
9.5.2.6 T33 High Ref./Feedb. Value 615 int32
9.5.2.7 T33 Low Ref./Feedb. Value 614 int32
9.5.2.8 T33 Filter Time Constant 616 uint16
9.5.2.9 T33 Voltage Dead Zone Scale 617 uint16
9.5.2.10 T33 Current Dead Zone Scale 618 uint16
9.5.3 Input Terminal 34
9.5.3.1 T34 Mode 629 enum
9.5.3.2 T34 High Voltage 621 uint16
9.5.3.3 T34 Low Voltage 620 uint16
9.5.3.4 T34 High Current 623 uint16
9.5.3.5 T34 Low Current 622 uint16
9.5.3.6 T34 High Ref./Feedb. Value 625 int32
9.5.3.7 T34 Low Ref./Feedb. Value 624 int32
9.5.3.8 T34 Filter Time Constant 626 uint16
9.5.3.9 T34 Voltage Dead Zone Scale 627 uint16
9.5.3.10 T34 Current Dead Zone Scale 628 uint16
9.5.4 Potentiometer Reference
9.5.4.1 Potentiometer High Ref. 682 int32
9.5.4.2 Potentiometer Low Ref. 681 int32
9.5.6 Live Zero
9.5.6.1 Live Zero Response 600 uint8
9.5.6.2 Live Zero Timeout Function 601 enum
10 Connectivity
10.1 FC Port Settings
288 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters