Danfoss iC2 - Page 8

To Next Page

To Previous Page

7.6.1 Status (Menu Index 5.1) 142

7.6.2 Protection (Menu Index 5.2) 145

7.6.3 Operation Mode (Menu Index 5.4) 148

7.6.4 Control (Menu Index 5.5) 149

7.6.4.1 General Settings (Menu Index 5.5.1) 149

7.6.4.2 Digital/Bus (Menu Index 5.5.2) 152

7.6.4.3 Reference (Menu Index 5.5.3) 156

7.6.4.4 Ramp (Menu Index 5.5.4) 162

7.6.5 Start Settings (Menu Index 5.6) 164

7.6.6 Stop Settings (Menu Index 5.7) 169

7.6.7 Speed Control (Menu Index 5.8) 172

7.6.8 Inching (Menu Index 5.9) 174

7.6.9 Torque Control (Menu Index 5.10) 174

7.6.10 Mechanical Brake Control (Menu Index 5.11) 176

7.6.11 Process Control (Menu Index 5.12) 177

7.6.11.1 Status (Menu Index 5.12.1) 177

7.6.11.2 Feedback (Menu Index 5.12.4) 178

7.6.11.3 PID Controller (Menu Index 5.12.5) 180

7.6.11.4 Feed Forward (Menu Index 5.12.6) 182

7.6.11.5 Sleep Mode (Menu Index 5.12.7) 182

7.6.12 Fieldbus Process Data (Menu Index 5.27) 185

7.7 Maintenance and Service (Menu Index 6) 188

7.7.1 Status (Menu Index 6.1) 188

7.7.2 Software Information (Menu Index 6.2) 191

7.7.3 Cooling Fan (Menu Index 6.5) 191

7.7.4 Parameter Handling (Menu Index 6.6) 192

7.7.5 Drive Identification (Menu Index 6.7) 196

7.8 Customization (Menu Index 8) 198

7.8.1 Custom Readout (Menu Index 8.1) 198

7.8.2 Smart Logic Controller (Menu Index 8.4) 200

7.8.2.1 Overview of Smart Logic Controller 200

7.8.2.2 Status (Menu Index 8.4.1) 200

7.8.2.3 SLC Settings (Menu Index 8.4.2) 201

7.8.2.4 Comparators (Menu Index 8.4.3) 205

7.8.2.5 Timers (Menu Index 8.4.4) 207

7.8.2.6 Logic Rules (Menu Index 8.4.5) 207

7.8.2.7 States (Menu Index 8.4.6) 214

Application Guide | iC2-Micro Frequency Converters

Related product manuals