Danfoss VLT - Ordered Typecode String; Actual Typecode String; Frequency Converter Ordering no; Power Card Ordering no

15-44 Ordered Typecode String
Range: Function:
0 N/A* [0 - 0 N/A] View the type code string used for re-ordering the frequency converter in its original configuration.
15-45 Actual Typecode String
Range: Function:
0 N/A* [0 - 0 N/A] View the actual type code string.
15-46 Frequency Converter Ordering No
Range: Function:
0 N/A* [0 - 0 N/A] View the 8-digit ordering number used for re-ordering the frequency converter in its original con-
figuration.
15-47 Power Card Ordering No
Range: Function:
0 N/A* [0 - 0 N/A] View the power card ordering number.
15-48 LCP Id No
Range: Function:
0 N/A* [0 - 0 N/A] View the LCP ID number.
15-49 SW ID Control Card
Range: Function:
0 N/A* [0 - 0 N/A] View the control card software version number.
15-50 SW ID Power Card
Range: Function:
0 N/A* [0 - 0 N/A] View the power card software version number.
15-51 Frequency Converter Serial Number
Range: Function:
0 N/A* [0 - 0 N/A] View the frequency converter serial number.
15-53 Power Card Serial Number
Range: Function:
0 N/A* [0 - 0 N/A] View the power card serial number.
3.15.7 15-6* Option Ident.
This read-only parameter group contains information about the hardware and software configuration of the options installed in slots A, B C0 and C1.
15-60 Option Mounted
Range: Function:
0 N/A* [0 - 0 N/A] View the installed option type.
15-61 Option SW Version
Range: Function:
0 N/A* [0 - 0 N/A] View the installed option software version.
VLT
®
HVAC Drive Programming Guide 3 Parameter Description
MG.11.C9.02 - VLT
®
is a registered Danfoss trademark 161
3