Danfoss VLT Programming Guide

5.1.17 18-** Info & Readouts
Par.
No. #
Parameter description Default value 4-set-up Change dur-
ing operation
Conver-
sion index
Type
18-0* Maintenance Log
18-00 Maintenance Log: Item 0 N/A All set-ups FALSE 0 Uint8
18-01 Maintenance Log: Action 0 N/A All set-ups FALSE 0 Uint8
18-02 Maintenance Log: Time 0 s All set-ups FALSE 0 Uint32
18-03 Maintenance Log: Date and Time SR All set-ups FALSE 0
TimeOf-
Day
18-1* Fire Mode Log
18-10 Fire Mode Log: Event 0 N/A All set-ups FALSE 0 Uint8
18-11 Fire Mode Log: Time 0 s All set-ups FALSE 0 Uint32
18-12 Fire Mode Log: Date and Time SR All set-ups FALSE 0
TimeOf-
Day
18-3* Inputs & Outputs
18-30 Analog Input X42/1 0.000 N/A All set-ups FALSE -3 Int32
18-31 Analog Input X42/3 0.000 N/A All set-ups FALSE -3 Int32
18-32 Analog Input X42/5 0.000 N/A All set-ups FALSE -3 Int32
18-33 Analog Out X42/7 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-34 Analog Out X42/9 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-35
Analog Out X42/11 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-5* Ref. & Feedb.
18-50 Sensorless Readout [unit] 0.000 SensorlessUnit All set-ups FALSE -3 Int32
VLT
®
HVAC Drive Programming Guide 5 Parameter Lists
MG.11.C9.02 - VLT
®
is a registered Danfoss trademark 293
5

Danfoss VLT Specifications

General

Frequency	50/60 Hz
Enclosure	IP20, IP21, IP55, IP66
Series	VLT
Control Technique	Flux Vector Control
Output Voltage	0-Vinput
Control Method	Fieldbus
Communication Interface	PROFIBUS, CANopen
Protection Features	Overload, Overvoltage, Undervoltage, Short Circuit, Ground Fault
Cooling Method	Liquid Cooled
Storage Temperature	-25°C to +70°C
Relative Humidity	5-95% non-condensing
Altitude	Up to 1000m (3280ft) without derating, up to 4000m (13120ft) with derating
Operating Temperature	-10°C to +50°C (14°F to 122°F)