Danfoss VLT Programming Guide

Logging Mode 15-13 158
Logging Source 15-10 156
Loggings 22
Logic Rule Boolean 1 13-40 136
Logic Rule Boolean 2 13-42 139
Logic Rule Boolean 3 13-44 141
Logic Rule Operator 1 13-41 139
Logic Rule Operator 2 13-43 141
Lon Warning Word 11-15 129
Lonworks 129
Lonworks Revision 11-18 130
Low Power Auto Set-up 22-20 203
Low Power Detection 22-21 203
Low Speed Detection 22-22 203
[Low Speed Hz] 22-33 205
Low Speed Load Compensation 1-60 54
[Low Speed Power Hp] 22-35 206
[Low Speed Power Kw] 22-34 206
[Low Speed Rpm] 22-32 205
M
Mac Id 10-02 124
[Main Actual Value %] 16-05 163
Main Menu - Frequency Converter Information - Group 15 155
Main Menu Mode 16, 21
Main Menu Mode 27
Main Menu Password 0-60 45
Main Menu Structure 31
Main Reactance 51
Main Reactance (xh) 1-35 52
Mains Failure 14-10 147
Mains On/off 147
Mains Supply 10
Mains Voltage At Mains Fault 14-11 148
Maintenance Action 23-11 222
Maintenance Date And Time 23-14 223
Maintenance Item 23-10 221
Maintenance Log: Action 18-01 172
Maintenance Log: Date And Time 18-03 172
Maintenance Log: Item 18-00 172
Maintenance Log: Time 18-02 172
Maintenance Text 23-16 223
Maintenance Time Base 23-12 222
Maintenance Time Interval 23-13 223
Maintenance Word 16-96 171
Manual Alternation 25-91 253
Manual Initialisation 30
Max Output Frequency 4-19 73
Maximum Boost Time 22-46 210
Maximum Feedback Level 20-74 186, 190
Maximum Inter-char Delay 8-37 107
Maximum Limit 3-93 70
Maximum Reference 3-03 63
Maximum Reference/feedb. 20-14 179
Maximum Response Delay 8-36 106
[Min Speed For Function At Stop Hz] 1-82 56
[Min Speed For Function At Stop Rpm] 1-81 56
[Min Speed Normal Magnetising Hz] 1-52 53
[Min Speed Normal Magnetising Rpm] 1-51 53
Minimum Aeo Frequency 14-42 152
Minimum Bin Value 23-65 229
Minimum Feedback Level 20-73 186, 190
Minimum Limit 3-94 70
Minimum Reference 3-02 63
Minimum Reference/feedb. 20-13 179
Minimum Response Delay 8-35 106
Minimum Run Time 22-40 209, 212
Index VLT
®
HVAC Drive Programming Guide
308 MG.11.C9.02 - VLT
®
is a registered Danfoss trademark

Danfoss VLT Specifications

General

Frequency	50/60 Hz
Enclosure	IP20, IP21, IP55, IP66
Series	VLT
Control Technique	Flux Vector Control
Output Voltage	0-Vinput
Control Method	Fieldbus
Communication Interface	PROFIBUS, CANopen
Protection Features	Overload, Overvoltage, Undervoltage, Short Circuit, Ground Fault
Cooling Method	Liquid Cooled
Storage Temperature	-25°C to +70°C
Relative Humidity	5-95% non-condensing
Altitude	Up to 1000m (3280ft) without derating, up to 4000m (13120ft) with derating
Operating Temperature	-10°C to +50°C (14°F to 122°F)