Parameter 1202 influences
1270, 1280, 1290, 1940 Busbar over-voltage protection 1, 2, 3 and 4.
1300, 1310, 1320, 1330,
1950
Busbar under-voltage protection 1, 2, 3, 4 and 5.
1620 Busbar unbalanced voltage protection.
1660, 1700
Busbar time-dependent over-voltage 1 and 2 (measured on busbar side of generator breaker, only in
generator controllers).
7480, 7490 Busbar over-voltage average protection 1 and 2.
Parameter 1203 refers to the current measurement as described earlier in this chapter, under "Unbalanced current".
Parameter 1203 influences
1500 Unbalanced current 1.
1710 Unbalanced current 2.
DESIGNER'S HANDBOOK 4189341275A EN Page 74 of 196
To Next Page
Loading...
Need help?
General
