Deif AGC-4 Mk II Designers Handbook

6.48 Counters
Counters for various values are included, and some of these can be adjusted if necessary, for instance if the controller is installed on
an existing genset or a new circuit breaker has been installed.
The table shows the adjustable values and their function in menu 6100:
Description
Function Comment
6101 Running time Offset adjustment of the total running hours counter. Counting when the running feedback is present.
6102 Running time
Offset adjustment of the total running thousand hours
counter.
Counting when the running feedback is present.
6103 GB operations
Offset adjustment of the number of generator breaker
operations.
Counting at each GB close command.
6104 MB operations
Offset adjustment of the number of mains breaker
operations.
Counting at each MB close command.
6105 kWh reset Resets the kWh counter.
Automatically resets to OFF after the reset. The reset
function cannot be left active.
6106 Start attempts Offset adjustment of the number of start attempts. Counting at each start attempt.
INFO
Additional counters for "Running hours" and "Energy" can be read out from the PC utility software.
DESIGNER'S HANDBOOK 4189341275A EN Page 180 of 196

Deif AGC-4 Mk II Specifications

General

Brand	Deif
Model	AGC-4 Mk II
Category	Controller
Language	English