Pag 29 / 154
Manuale Lyra 600 sx elettr eng
2 emergency stop buttons (1-2 fig. 2.6.1.1H), red mushroom button against a yellow
background; one is positioned on the control panel and the other at the extreme left
of the infeed conveyor (present only on conveyor belts with standard dimensions).
The emergency stop button is connected to the safety module inside the electric
panel. The triggering of the button will trigger the safety module which will make the
machine stop. This type of arrest implies the loss of the packaging cycle underway,
and will have to be activated from the start: meaning that the products blocked inside
the sealing group will have to be removed, the film reinserted, and the <RESET>
button (3 fig. 2.6.1.1H) pressed on the control panel.
Fig. 2.6.1.1H Protective device – emergency stop button
To Next Page
Loading...