Delfin LYRA - Page 42

Pag 42 / 154
Manuale Lyra 600 sx elettr eng
RESIDUAL RISK N. 8
Type of hazard
Mechanical type of hazards
Cause
Rotating elements.
Potential
consequences
 Getting crushed between the machine’s rotating parts.
 Getting crushed between the machine’s rotating and fixed
parts.
Danger zone related
to cause of danger
 Between the mobile (1 fig. 2.7.1.1H) and fixed (2 fig.
2.7.1.1H) parts of the motorized reel.
Phase of the
operating cycle
 Machine preparations.
 Machine use.
Task
 Operator.
Dangerous event
Entering the danger zone with the machine running.
Risk frequency
 During machine preparations, when inserting the film, when
the machine is commanded to run in IMPULSE mode.
 During the packaging cycle, risk frequency is unforeseeable
since the event is not usually part of normal machine usage.
Comment on
residual risk
The fixed and mobile guards of the longitudinal sealing group do
not impede access to the danger zone.
 For IMPULSE mode runs, the manufacturer adopts additional
safety measures: low speed, press and hold commands,
indications in the instruction manual.
 During the packaging cycle the operator does not need to
enter the danger zones.
Type of hazard
Injuries to hands or fingers.
Fig. 2.7.1.1H Position of residual risk no. 8
2
1