NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can
reconnect the cables correctly after you replace the system board.
2. Remove the left-side cover.
3. Remove the front bezel.
4. Remove the air shroud.
5. Remove the memory module.
6. Remove the PCIe holder.
7. Remove the powered GPU.
NOTE: Remove the graphics-card rubber protector from the chassis before removing the system board.
8. Remove the heat-sink assembly.
9. Remove the front-fan assembly and rear-fan assembly.
10. Remove the processor.
11. Remove the right-side cover.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
110 Removing and installing components
To Next Page
Loading...
