Dell Precision 7960 Tower - Removing the Ultraspeed Duo Card

Removing the UltraSpeed Duo card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the air shroud.
About this task
The following images indicate the location of the UltraSpeed Duo card and provide a visual representation of the removal
procedure.
Steps
1. Push the PCIe latch to open the PCIe door.
2. Lift and remove the UltraSpeed Duo card away from the expansion-card slot.
3. Align and place the PCIe filler into the PCIe slot and close the PCIe latch.
Removing and installing components
73