Removing the wireless card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the air shroud.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
Steps
1. Disconnect the PCIe-riser card cable from the connector on the system board.
2. Remove the PCIe-riser card cable from the hook on the chassis.
3. Push the PCIe latch to open the PCIe door.
4. Remove the PCIe-riser card from the expansion-card slot.
84
Removing and installing components
To Next Page
Loading...
