Steps
1. Slide and insert the 2.5-inch hard-drive assembly into the external flexbay slot.
2. Close the release latch to secure the 2.5-inch hard-drive assembly in place.
Next steps
1. Install the front hard-drive bezel.
2. Follow the procedure in After working inside your computer.
Removing the front 3.5-inch hard-drive assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the front hard-drive bezel.
About this task
The following images indicate the location of the external 3.5-inch hard-drive assembly and provide a visual representation of
the removal procedure.
44
Removing and installing components
To Next Page
Loading...
