Steps
1. Position the front bezel to align the tabs on the bezel with the slots on the chassis.
2. Press the bezel until the tabs clicks into place.
Next steps
1. Install the side cover.
2. Follow the procedure in After working inside your computer.
Front optical-drive and hard-drive bezel
Removing the front optical-drive and hard-drive bezel
Prerequisites
1. Follow the procedure in Before working inside your computer.
About this task
The following images indicate the location of the front optical-drive and hard-drive bezel and provide a visual representation of
the removal procedure.
Removing and installing components
17
To Next Page
Loading...
