Dell Precision 7960 Tower - Memory Fan; Removing the Front Memory-Fan

Steps
1. Align the air shroud over the heat-sink and system board holding and seat it in the slot.
2. Press the air shroud down until the tabs clicks into place.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Memory fan
Removing the front memory-fan
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the air shroud.
About this task
The following images indicate the location of the front memory-fan and provide a visual representation of the removal
procedure.
30
Removing and installing components