Steps
1. Align the M.2 solid-state drive module with the slot on the computer and carefully slide it in.
2. Slide the M.2 solid-state drive module into the slot, until it clicks into place.
Next steps
1. Follow the procedure in After working inside your computer.
External storage flexbay (Solid-state drive)
Removing the M.2 solid-state drive carrier
Prerequisites
1. Follow the procedure in Before working inside your computer.
About this task
The following images indicate the location of the M.2 solid-state drive carrier and provide a visual representation of the removal
procedure.
Removing and installing components
55
To Next Page
Loading...
