Steps
1. Insert the power-supply unit into the slot on the back of the chassis.
2. Slide the power-supply unit until the securing tab snaps into position.
3. Remove the screw from the unlock position and replace the screw into the lock position.
Next steps
1. Follow the procedure in After working inside your computer.
Power-distribution board
Removing the power-distribution board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the right-side cover.
3. Remove the power-supply unit.
About this task
The following image indicates the location of the power-distribution board and provide a visual representation of the removal
procedure.
Removing and installing components
91
To Next Page
Loading...
