Dell Precision 7960 Tower - Speaker; Removing the Speaker; Installing the Speaker

3. Follow the procedure in After working inside your computer.
Speaker
Removing the speaker
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the front bezel.
About this task
The following image provides a visual representation of the speaker removal procedure.
Steps
1. Disconnect the speaker cable from the speaker dongle-cable.
2. Press the two tabs and remove the speaker along with the cable from the slot on the chassis.
Installing the speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image provides a visual representation of the speaker installation procedure.
86
Removing and installing components