Steps
Insert the coin-cell battery into the socket with the positive side (+) label facing up and snap the battery in the socket.
Next steps
1. Install the air shroud.
2. Install the left-side cover.
3. Follow the procedure in after working inside your computer.
External storage flexbay (Hard drive)
Removing the front 2.5-inch hard-drive assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the front hard-drive bezel.
About this task
The following images indicate the location of the external 2.5-inch hard-drive assembly and provide a visual representation of
the removal procedure.
42
Removing and installing components
To Next Page
Loading...
