Steps
1. Position the front optical-drive and hard-drive bezel to align the tabs on the bezel with the slots on the chassis.
2. Press the bezel until the tabs clicks into place.
Next steps
1. Follow the procedure in After working inside your computer.
Front optical-drive and hard-drive inner bezel
Removing the front optical-drive and hard-drive inner bezel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the right-side cover.
About this task
The following images indicate the location of the front optical-drive and hard-drive inner bezel and provide a visual
representation of the removal procedure.
Removing and installing components
19
To Next Page
Loading...
