Dell Precision 7960 Tower - Front I;O-Bezel; Removing the Front I;O-Bezel

About this task
The following image provides a visual representation of the top cover installation procedure.
Steps
1. Align the screw holes on the top cover with the screw holes on the chassis.
2. Replace the four screws (6-32) to secure the top cover to the chassis.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Front I/O-bezel
Removing the front I/O-bezel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the front bezel.
4. Remove the front optical-drive and hard-drive bezel.
5. Remove the top cover.
22
Removing and installing components