NOTE: The UltraSpeed Duo card can support two solid-state drives. Repeat step 1 to step 10 to install the solid-state
drive into the second slot.
Next steps
1. Install the UltraSpeed Duo card.
2. Install the left-side cover.
3. Follow the procedure in after working inside your computer.
Installing the UltraSpeed Duo card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the UltraSpeed Duo card and provide a visual representation of the installation
procedure.
76 Removing and installing components
To Next Page
Loading...
